Home / Shed Plans / 10×10 Shed Plans – Gambrel Shed
10x10 shed plans gambrel shed

10×10 Shed Plans – Gambrel Shed

10×10 shed plans, gambrel roof design. Plans include free PDF download, drawings, measurements, shopping list, and cutting list.

10×10 Shed Plans – Gambrel Shed – Overview

 

10×10 Shed Plans – Gambrel Shed – Material List

Shopping List

Shopping List

Floor

11 – pressure-treated 2×6 – 10′

3 – pressure-treated 4×4 – 10′

4 – 3/4″ tongue and groove plywood – 4’x8′ sheet

Wall Frames

12 – 2×4 – 10′

44 – 2×4 – 8′

Rafters / Truss

22 – 2×4 – 8′

Siding

14 – t1-11 exterior siding – 4’x8′ sheet

Front / Back Roof Trim

4 – 2×4 – 8′

Roof Deck

6 – 1/2 plywood – 4’x8′ sheet

Corner Trim / Side Trim

8 – 1×4 – 8′

2 – 1×4 – 12′

Hardware

shingles

roofing felt

roof staples

roof tacks

drip edge

3 1/2″ galvanized nails

1 1/4″ galvanized finishing nails

3″ galvanized finishing nails

2″ galvanized nails

2″ deck screws

door hinges

door handle

Cutting List

Cutting List

Floor

2 – pressure-treated 2×6 – 10′

9 – pressure-treated 2×6 – 9′ 9″

3 – pressure-treated 4×4 – 10′

4 – 3/4″ tongue and groove plywood – 4’x8′ sheet (cut to size)

Wall Frames

6 – 2×4 – 10′

6 – 2×4 – 9′ 5″

44 – 2×4 – 7′ 6″

Rafters / Truss

36 – 2×4 – 3′ 9 7/8″ (22.5 angle cuts on ends  opposite direction)

4 – 2×4 – 8′ (cut to size)

Siding

14 – t1-11 exterior siding – 4’x8′ sheet

Front / Back Roof Trim

8 – 2×4 – 3′ 9 7/8″ (22.5 angle cuts on ends  opposite direction)

Roof Deck

6 – 1/2″ plywood – 4’x8′ sheet (cut to size)

Corner Trim / Side Trim

8 – 1×4 – 8′ (cut to size)

2 – 1×4 – 12′ (cut to size)

 

10x10 shed plans - gambrel shed - floor view

The 10×10 gambrel shed floor is built with pressure treated 2×6’s and pressure treated 4×4’s.

Cut two 2×6’s to 10′ long for the band. Cut nine 2×6’s to 9′ 9″ long for the floor joist. Nail 3 1/2″ nails through the 2×6 band and into the floor joist. Floor joist 16″ O.C.

Attach the 10′ long 4×4 pressure treated skids to the bottom of the floor frame. Square out the floor frame by measuring diagonally until both sides measure the same. Secure the 4×4 skids by nailing 3 1/2″ nails through the floor frame and into the 4×4 skids.

 

10x10 shed plans - gambrel shed - floor skids - floor deck

Cut to size and install the 3/4″ tongue and groove plywood for the floor deck. Secure the floor plywood with 2″ deck screws. Screw through the plywood and into the floor frame.

 

10x10 shed plans - gambrel shed - front back wall frame

Front and back wall frames. The shed wall frame is built using 2×4’s.

The wall studs are 16″ O.C.

Assemble the back wall frame as shown on illustration above ( see illustration below for close up view ).

The front wall frame will have a door and, for instructions on framing the door or window see the pages below:

Assemble the front and back wall frame using 3 1/2″ nails.

 

10x10 shed plans - gambrel shed - wall frame close up

Illustration above shows a close up look of the front and back wall frame ends.

 

10x10 shed plans - gambrel shed - side wall frame

Cut the 2×4’s as shown on illustration above for the side walls.

Wall studs are 16″ O.C.

Assemble the side wall frame using 3 1/2″ nails.

 

10x10 shed plans - gambrel shed - truss details

The illustration above shows details for the shed truss.

 

10x10 shed plans - gambrel shed - rafters

The shed roof truss is built using 2×4’s.

Cut the 2×4’s as shown on illustration above. The truss are assembled using 1/2″ plywood gussets. Nail 2″ nails through the gusset and into the rafters.

 

10x10 shed plans gambrel shed - truss installed

Attach the roof truss to the shed, the roof truss will be spaced out  16″ O.C. Toenail 3 1/2″ nails through the roof truss and into the wall frame.

 

10x10 shed plans gambrel shed - notch studs

Cut 2×4’s to size, notch the top around rafters, see illustration above.

Cut the t1-11 exterior siding and install using 1 1/4″ finishing nails.

 

 

10x10 shed plans - gambrel shed - siding - trim

Cut and install the front and back 2×4  roof trim as shown on illustration above. Use clamps to hold the trim in place, use 3″ finishing nails to install the 2×4 trim.

 

10x10 shed plans - gambrel shed - roof deck

Measure, cut, and install the 1/2″ plywood for the roof deck using 2″ nails. Nail through the roof deck and into the roof truss frame.

 

10x10 shed plans - gambrel shed - trim
Install the side and corner trim as shown on illustration using 2″ finishing nails.

10x10 shed plans - gambrel shed - roof shingles

Install roofing felt, drip edge, and shingles.

Like these 10×10 shed plans? Let me know, leave me a comment below. Share this link with your friends and your social media, thanks.
Construct101 offers free online version plans. These free plans also have a free print friendly PDF downloadable version free of ads. Click here to download.

Check Also

Lean to shed plans, free PDF download.

Lean To Shed Plans – 4×8 – Step-By-Step Plans

Lean to shed plans – 4’x8′. Shed plans include a free PDF download, illustrated step-by-step instructions, …

Leave a Reply

Your email address will not be published. Required fields are marked *