Firewood shed plans include a free PDF download, material list, and step-by-step instructions with drawings.
Firewood Shed Plans – Overview
Firewood Shed Plans – Material List
Shopping List
Shopping List
2 – 4×4 – 10′
3 – 2×4 – 10′
2 – 2×4 -8′
18 – 1×4 – 8′
1 – corrugated roof panel – 12′
corrugated closure strips
3″ deck screws
2 1/2″ deck screws
Cutting List
Cutting List
2 – 4×4 – 5′
5 – 2×4 – 5′
2 – 4×4 – 4′ 3 1/2″
18 – 1×4 – 2′ 10″
10 – 1×4 – 5′
2 – 1×4 – 2′ 3″
12 – 1×4 – 2′ 1- 3/4″
2 – 2×4 -4′ (15-degree angle cuts same direction)
2 – 2×4 – 5′ (15-degree bevel cut)
- Step 1
Cut two 4×4’s to 5′ long and make a 3 1/2″ notch 1 1/2″ deep.
- Step 2
Cut two 2×4’s to 5′ long. Pre-drill holes and attach the 2×4’s to the 4×4 post as shown on illustration above using 3″ deck screws.
- Step 3
Cut a 2×4 to 5′ long. Pre-drill holes and install as shown on illustration above using 3″ deck screws.
- Step 4
Cut two 4×4’s to 4′ 3 1/2″ long, and one 2×4 to 5′ long. Pre-drill holes and assemble as shown on illustration above using 3″ deck screws.
- Step 5
Cut eighteen 1×4’s to 2′ 10″ long. Pre-drill holes and install the 1×4 slats to the sides using 2 1/2″ deck screws, leaving a 1″ gap between 1×4 boards.
- Step 6
Cut ten 1×4’s to 5′ long. Pre-drill holes and install the 1×4 slats to the back using 2 1/2″ deck screws, leaving a 1″ gap between 1×4 boards.
- Step 7
Cut two 1×4’s to 2′ 3″ long, and twelve 1×4’s to 2′ 10 3/4″ long. Pre-drill holes and install the 1×4 floor slats as shown on illustration above, gap 1×4 slats 1″ and install using 2 1/2″ deck screws.
- Step 8
Cut two 2×4’s to 4′ long. Cut 15-degree angle cuts to the ends in the same direction.
- Step 9
Install the 2×4 rafters to the sides as shown on illustration above, pre-drill holes and use 3″ deck screws to install.
- Step 10
Cut two 2×4’s to 5′ long, cut 15-degree bevel cuts to the 2×4’s. Pre-drill holes and install to the front and back using 3″ deck screws.
Cut a 2×4 to 5′ long. Pre-drill holes and install as shown on illustration above using 3″ deck screws.
- Step 11
Install the corrugated closure strips. Cut corrugated roof panel to size and install.
I never got the firewood storage pdf
They might have gone to your spam folder, if they are not there send me an email so I can email them to you, thank you.
Shopping list, cutting list, and the picture do not add up. If the shopping list is the source of truth, then the 1×4 sides should be cut to 32 inches, 1×4 for floor 31.25 inches and two short floorboards 24.25.
Please update the “cut list” for the Fire wood shed, the floor boards in the cut list is inconsistent with the plans by 9”. The plans worked great other than that …thanks
Please send the plans for woodshed. Thank you 😀
Please send me the plans for the wood shed.
I would also like a pdf, I cant dfownload it
Please send plans for firewood shed
I tired emailing you directly but haven’t received the pdf. Could you please send the Firewood Shed pdf? Thank you
can you send me pdf format please
Download link is at the bottom of blog post.
I would like to receive the pdf drawing plans
Are there any plans for a 4 foot wide by 16 foot long wood shed available?
Cut list is wrong for the ten 1×4 flooring pieces. Double check, READ the assembly instructions before cutting.. otherwise you will cut them 9 inches too short. Cut list is missing a zero after the one.
Good catch, thank you!
Otherwise a very nice small project. Looks just right.
I loved the firewood shed plans. Worked great for me
Please send me the firewood shed plans. Thank you.
I just made this – very happy with the outcome. Snagged a few free pallets which covered the sides and floor 1 x 4s
Please send the firewood shed plans. Have reviewed and/or corrected the plans after the comments were files concerning errors found? Do you have plans for 8’ x 16’ firewood shed?
Please send me the PDF 🙂