DIY Cardinal Bird House

Construct101 Forums Submit Your Project DIY Cardinal Bird House


Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #52532

    Built using these plans “Cardinal Nesting Shelter Birdhouse Plans

    This bird house was built using a 6 foot 1×8 fence board. Bird house was assembled using exterior wood glue and a 16 gauge nail gun using1 1/2″ finish nails.

    All parts were cut using a miter saw.

    Attach the sides to the floor.

    Attach back board.

    Attach roof boards.

    Attach front board.

    Cardinal Bird House – PDF Download



    I believe the dimension given for part A is incorrect. Can someone please check it for me? I cut according to the dimensions given and that particular piece seems a bit short and doesn’t protrude on the front end as pitcured.


    You can make two of these nesting boxes with one 1x8x8′ board. Here’s the cut list if the board is true 8″ wide.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.