Home / Pergola Plans / Pergola Plans – 10×12 – Free PDF Download
10x12 pergola plans - free PDF download, material list, and drawings, DIY projects at Construct101

Pergola Plans – 10×12 – Free PDF Download

Pergola plans – 10×12 – plans include a free PDF download, material list, drawings, measurements, and step-by-step instructions.

Pergola Plans – 10×12 – Overview

Pergola Plans – 10×12 – Material List

Shopping List

Shopping List

4 – 6×6 – 8′

4 – 2×6 – 14′

11 – 2×6 – 12′

4 – 2×6 – 8′

13 – 2×2 – 14′

Hardware

4 – 6×6 post base

16 – 9″ carriage bolts, nuts, washers

3″ deck screws

Cutting List

Cutting List

4 – 6×6 – 8′

4 – 2×6 – 14′

11 – 2×6 – 12′

4 – 2×6 – 4′

4 – 2×6 – 3′ 4 5/16″

13 – 2×2 – 14′

Pergola plans - 10x12 - 6x6 post.

Cut four 6×6’s to 8′ long. Install to a 10’x12′ area as shown in illustration above, measure and make sure area is squared. Secure with 6×6 post base.

Pergola plans - 10x12 - crossbeam details

Cut four 2×6’s to 14′ long. Cut four 2×6’s to 12′ long. Cut the ends of the boards as shown on illustration above.

Pergola plans - 10x12 - front and back crossbeam.

Install the four 14′ 2×6 boards to the front and back as shown on illustration above. Use clamps to hold boards in place, drill holes through post and boards, and secure with 9″ carriage bolts.

Pergola plans - 10x12 - side crossbeams.

Install the four 12′ 2×6 boards to the sides as shown on illustration above. Use clamps to hold boards in place, drill holes through post and boards, and secure with 9″ carriage bolts.

Pergola plans 10x12 - top board details.

Cut seven 2×6’s to 12′ long. Cut the ends of the boards as shown on illustration above.

Pergola plans - 10x12 - top boards.

Install the seven 12′ 2×6 boards as shown on illustration above. Pre-drill holes and screw 3″ deck screws through the side of the top board and into the bottom board.

Pergola plans - 10x12 - front and back brace.

Cut four 2×6’s to 4′ long, for the front and back brace. Cut boards as shown on illustration above.

Pergola plans - 10x12 - side brace.

Cut four 2×6’s to 3′ 4 5/16″ long, for the side brace. Cut boards as shown on illustration above.

Pergola plans - 10x12 - brace.

Pre-drill holes and install the 2×6 corner brace using 3″ deck screws.

Pergola plans - 10x12 - slats.

Cut thirteen 2×2 to 14′ long. Space out boards 1′. Pre-drill all holes and screw 3″ deck screws through the top of the 2×2’s and into the 2×6 bottom boards.

Like these pergola plans – 10×12? Let me know, leave me a comment below. Share this link with your friends and your social media, thanks.
Construct101 offers free online version plans. These free plans also have a free print friendly PDF downloadable version free of ads. Click here to download.

Leave a Reply

Your email address will not be published. Required fields are marked *