Construct101
DIY 5 inch sandpaper organizer, plans include a PDF download (link at bottom of blog post), measurements, material list, drawings, and instructions.
DIY 5 Inch Sanding Disc Organizer | Material List
Cutting List
| Part# | Qty. | Disc. | Size |
| A | 6 | plywood/mdf/etc… | 5 in. x 6 in. (cut as shown on drawing below) |
| B | 1 | plywood/mdf/etc… | 5 in. x 13 in. |
| C | 1 | plywood/mdf/etc… | 2 in x 13 in |
| D | 1 | plywood/mdf/etc… | 7 in. x 13 in. |
Shopping List
| Qty. | Disc. | Size |
| 1 | plywood/OSB/etc… | 1/2 in. x 2 ft. x 4 ft. |
| finish nails | 16 gauge 1 inch | |
| wood glue |
Overview | DIY 5 Inch Sanding Disc Organizer
Cut six boards (A) to 5 in. x 6 in.
Cut the slope as shown on drawing.
Cut one board (B) to 5 in. x 13 in.
Assemble as shown on drawing using wood glue and 16 gauge 1 inch finish nails.
Cut one board (C) to 2 in. x 13 in.
Assemble as shown on drawing using wood glue and 16 gauge 1 inch finish nails.
Cut one board (D) to 7 in. x 13 in.
Assemble as shown on drawing using wood glue and 16 gauge 1 inch finish nails.
Install the four remaining boards (A) as shown on drawing.
Assemble as shown on drawing using wood glue and 16 gauge 1 inch finish nails.
-
DIY 5 Inch Sanding Disc Organizer | PDF Download
-
Plywood Shop Cart Plans – PDF Download
-
1 Inch Graph Paper Printable | Free PDF Download
If you like these DIY projects let me know in the comments below, thanks for your support!
