Construct101 Find Your Next DIY Project at Construct101
- This topic has 1 reply, 2 voices, and was last updated 2 years, 6 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Plans used “Robin Nesting Shelter Plans”
Cut all parts out using a 1″x8″ fence board. Use exterior wood glue and 1 1/2″ finish nails to assemble.
Install sides to back board.
Install floor.
Install front board.
Install roof.
Nice concept!
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.