Cedar Planter Box Plans | 4ft. Rectangular Planter

Material List

Cutting List

Shopping List

● (A) – 8 – fence board – 1 3/4 in. x 17 3/8 in.

Cut the corner supports (A) to size.

Assemble as shown on drawing using exterior wood glue and finish nails.

● (B) – 6 – fence board – 5 1/2 in. x 46 3/4 in.

Cut the front and back (B) to size.

Assemble as shown on drawing using exterior wood and finish nails.

● (C) – 6 – fence board – 5 1/2 in. x 9 1/2 in.

Cut the sides (C) to size.

Assemble as shown on drawing using exterior wood glue and finish nails.

● (D) – 2 – fence board – 1/2 in. x 45 1/2 in.

Cut the bottom supports (D) to size.

Assemble as shown on drawing using exterior wood and finish nails.

● (E) – 9 – fence board – 5 1/2 in x 9 1/2 in.

Cut the bottoms (E) to size, measure and cut the last piece to size.

Assemble as shown on drawing using exterior wood glue and finish nails.

● (F) – 2 – fence board – 1/2 in. x 14 in.

Cut the front and back brace (F) to size.

Assemble as shown on drawing using exterior wood glue and finish nails.

● (G) – 2 – fence board – 1 3/4 in. x 48 in. (45-degree angle cuts on both end in opposite direction).

● (H) – 2 – fence board – 1 3/4 in. x 12 in, (45-degree angle cuts on both ends in opposite direction).

Cut the front/back trim (G) to size, cut the side trim (H) to size.

Assemble as shown on drawing using exterior wood glue and finish nails.

Drill 3/4 inch holes to the bottom for drainage.

Staple plastic planter liner to bottom and sides to protect wood from moisture.

Sand, seal and stain or leave as is for a natural weathered grayish look.